Description
Flow measurement of waste water
Requirements
- Insensitive against scaling
Recommended products and solutions
OPTIFLUX 5000
Electromagnetic flow sensor for combination with IFC 100 and IFC 300 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Level measurement in seperator
Requirements
- Process control
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
OPTISWITCH 5100
Vibration level switch for process applications
Description
Sludge level measurement
Requirements
- Immersionprobe
Recommended products and solutions
OPTISENS TSS 2000
Optical total suspended solids sensor for wastewater applications
MAC 100
Liquid analytical transmitter for measurements with sensors of the OPTISENS portfolio
Description
Flow measurement of pre clarified waste water
Requirements
- Insensitive against scaling
Recommended products and solutions
OPTIFLUX 4000
Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Level measurement at sludge thickner
Requirements
- Process control
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
Description
Dosing of oxidant, flocculant and other chemicals
Requirements
- Low maintance requirements
- No drift
Recommended products and solutions
SMARTPAT PH 1590
Potentiometric pH sensor for potable, process or treated water applications
SMARTPAT PH 8320
Potentiometric pH sensor for water and wastewater applications
SMARTPAT ORP 1590
Potentiometric ORP sensor for water and wastewater applications
SMARTPAT ORP 8510
Potentiometric ORP sensor for water and wastewater applications
SMARTPAT COND 1200
Conductive conductivity sensor for water and wastewater applications
OPTISENS PH 8300
Potentiometric pH sensor for wastewater, surface and process water applications
OPTISENS ORP 8590
Potentiometric ORP sensor for water and wastewater applications
SENSOFIT IMM 1000
Immersion assembly for general water and wastewater treatment applications
Description
Flow measurement of pre clarified waste water
Requirements
- Insensitive against scaling
Recommended products and solutions
OPTIFLUX 4000
Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Sludge level measurement in sedimentation
Requirements
- Immersionprobe
Recommended products and solutions
OPTISYS SLM 2100
Optical sludge level measuring system for sedimentation profile measurement and continuous tracking of sludge blanket
Description
Quality measurement of clarified water
Requirements
- Low maintance requirements
Recommended products and solutions
OPTISENS TSS 2000
Optical total suspended solids sensor for wastewater applications
MAC 100
Liquid analytical transmitter for measurements with sensors of the OPTISENS portfolio
Description
Level measurement of overflow channel
Requirements
- No maintanance
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
Description
Flow measurement of preclarified waste water
Requirements
- Process control
Recommended products and solutions
OPTIFLUX 4000
Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Level measurement of sludge thickner
Requirements
- Process control
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
Description
Sludge level measurement in sedimentation 2
Requirements
- Immersionprobe
Recommended products and solutions
OPTISYS SLM 2100
Optical sludge level measuring system for sedimentation profile measurement and continuous tracking of sludge blanket
Description
Level measurement at sludge thickner
Requirements
- Process control
Recommended products and solutions
OPTIFLUX 4000
Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Quality measurement of clarified water
Requirements
- Low maintance requirements
Recommended products and solutions
OPTISENS TSS 2000
Optical total suspended solids sensor for wastewater applications
MAC 100
Liquid analytical transmitter for measurements with sensors of the OPTISENS portfolio
Description
Level measurement of overflow channel
Requirements
- No maintanance
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
Description
Level measurement of equalization tank
Requirements
- No maintanance
- High moisture
Recommended products and solutions
OPTIWAVE 7500
Radar (FMCW) level transmitter for liquids in narrow tanks with internal obstructions
Description
Flow for reuse or preflooder
Requirements
- Local CT requirement
Recommended products and solutions
OPTIFLUX 4300
Electromagnetic flowmeter for advanced process and custody transfer (CT) applications
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Quality measurement for sludge conditioning
Requirements
- Low maintance requirements
Recommended products and solutions
SMARTPAT PH 1590
Potentiometric pH sensor for potable, process or treated water applications
SMARTPAT PH 8320
Potentiometric pH sensor for water and wastewater applications
SMARTPAT ORP 1590
Potentiometric ORP sensor for water and wastewater applications
SMARTPAT ORP 8510
Potentiometric ORP sensor for water and wastewater applications
SMARTPAT COND 1200
Conductive conductivity sensor for water and wastewater applications
OPTISENS PH 8300
Potentiometric pH sensor for wastewater, surface and process water applications
OPTISENS ORP 8590
Potentiometric ORP sensor for water and wastewater applications
SENSOFIT IMM 1000
Immersion assembly for general water and wastewater treatment applications
Description
Level measurement of treatment tank
Requirements
- No maintanance
- High moisture
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
OPTIWAVE 7500
Radar (FMCW) level transmitter for liquids in narrow tanks with internal obstructions
Description
Level measurement of filtrate tank
Requirements
- No maintanance
- High moisture
Recommended products and solutions
OPTIWAVE 7500
Radar (FMCW) level transmitter for liquids in narrow tanks with internal obstructions
Description
Flow measurement of filtrate
Requirements
- Process control
Recommended products and solutions
OPTIFLUX 4000
Electromagnetic flow sensor for combination with IFC 050, IFC 100, IFC 300 and IFC 400 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Analyzer house for FGD water treatment plant
Requirements
- Complete system ready for operation
- Process control
Recommended products and solutions
Analyser houses and shelters
Analyser solution for crude oil, refined products and natural gas
Overview
FGD wastewater treatment in biomass power plant
Instrumentation in water treatment
Flue Gas Desulfurization (FGD) wastewater from solid fired power plants is often saturated with calcium sulphate, while containing both metals and chlorides. The process steps of treatment must be adapted to the particular wastewater and often consist of chemical treatment, flocculation and clarifiers and filtration. The water can be reused in the process or further be polished for higher requirements.
Especially in these processes with sedimentation a reliable measurement of the sludge level and sludge profile is essential for a safe clarifier performance and an efficient use of flocculant. With the OPTISENS TSS/ MAC and OPTISYS SLM different analysers and systems of the for TSS interface and profile measurement are available beside a range of rugged and corrosion resistant instruments for flow, level, pressure and temperature measurement.