Conductivity sensors and measuring systems
For conductive or inductive conductivity measurement
- Sensors with or without integrated transmitter (4…20 mA / HART®)
- Also available as compact systems with integrated electronics or as pre-wired panel module for simultaneous measurement of conductivity and other parameters
- For a broad variety of applications – from ultrapure water to potable water to CIP agents
Water analysis panel
Multi-parameter measuring system for water quality monitoring
- Flexibility in selecting different water parameters: dissolved oxygen, turbidity, conductivity, pH/ORP
- Installation on compact analytical modules: All measuring points at one location
- Completely pre-wired and pre-assembled for easy bypass installation
SMARTPAT COND 1200
Conductive conductivity sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male)
- 0.1…20 mS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes and Pt1000 for temperature compensation
SMARTPAT COND 3200
Conductive conductivity sensor for condensate, process, boiler feed or (ultra)pure water
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male), ¾ NPT (male)
- 0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes and Pt1000 for temperature compensation
SMARTPAT COND 5200
Conductive conductivity sensor for chemicals and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male), ¾ NPT (male)
- 10 μS…15 mS/cm; Max. +130°C / +266°F; 16 bar / 232 psi
- With graphite electrodes and Pt1000 for temperature compensation
SMARTPAT COND 7200
Conductive conductivity sensor for food, beverage and pharmaceutical applications
- 2-wire loop powered, 4…20 mA/HART®7, for direct connection to a PCS
- Process connection: VARIVENT® N, Tri-Clamp 1½", 2"
- 0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes (Ra <0.8 μm) and Pt1000 for temperature compensation
OPTISENS COND 1200
Conductive conductivity sensor for water, wastewater, process water or pure water
- For use with analytical transmitter
- Process connection: G½, G¾, G1, ¾ NPT (male)
- 0.05 μS/cm…20 mS/cm; Max. +135°C / +275°F
- With two stainless steel, titanium or graphite electrodes and Pt100 for temperature compensation
OPTISENS COND 7200
Conductive conductivity sensor for hygienic applications
- For use with analytical transmitter
- Process connection: Clamp DN25-40, 1½"
- 0.05…1000 μS/cm; Max. +135°C / +275°F
- Short or long version with stainless steel electrodes and Pt100 for temperature compensation
OPTISENS IND 1000
Inductive conductivity sensor for water, wastewater and chemical applications
- For use with analytical transmitter
- Process connection: G1½ union nut and immersion versions
- 1…2000 mS/cm; Max. +100°C / +212°F
- Electrodeless conductivity sensor with Pt1000 for temperature compensation
OPTISENS IND 7000
Inductive conductivity sensor for food and beverage applications
- For use with analytical transmitter
- Process connection: Dairy screw (DIN 11851) DN50 and DN65, VARIVENT® N, G1½ or G2 (male, non-hygienic)
- 0.5…2000 mS/cm; Max. +125°C / +257°F (for SIP/CIP); 10 bar / 145 psi
- Sterilisable PEEK sensor (FDA and EC1935/2004 conform) with temperature compensation
OPTISYS IND 8100
Inductive conductivity measuring system for food and beverage applications
- 4-wire, 4…20 mA, with head-mounted or remote transmitter
- Process connection: G1 for hygienic adapters
- 0.05…1000 mS/cm; Max. +140°C / +285°F; 25 bar / 362 psi
- Hygienic PEEK sensor, robust (IP69K), with temperature compensation