Description
Flow measurement of blow down water
Requirements
- Insensitive against scaling
Recommended products and solutions
OPTIFLUX 5000
Electromagnetic flow sensor for combination with IFC 100 and IFC 300 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Level measurement of hydraulic accumolator
Requirements
- No maintanance
- High moisture
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
OPTIWAVE 7500
Radar (FMCW) level transmitter for liquids in narrow tanks with internal obstructions
Description
Temperature measurement after heat exchanger
Requirements
- Process control
Recommended products and solutions
OPTITEMP TRA-P10
Resistance (RTD) temperature assembly for standard applications
Description
Flow measurement of clarified water
Requirements
- Process control
Recommended products and solutions
OPTIFLUX 5000
Electromagnetic flow sensor for combination with IFC 100 and IFC 300 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Measurement of filter resistance
Requirements
- No drift
- Overpressure protection
Recommended products and solutions
OPTIBAR DP 7060
Differential pressure transmitter for flow, level, differential pressure, density and interface measurements
Description
Level measurement of pure water tank
Requirements
- Process control
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
OPTIWAVE 7500
Radar (FMCW) level transmitter for liquids in narrow tanks with internal obstructions
Description
Flow measurement of preclarified water
Requirements
- Process control
Recommended products and solutions
OPTIFLUX 5000
Electromagnetic flow sensor for combination with IFC 100 and IFC 300 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Temperature measurement of ion exchanger inflow
Requirements
- Process control
Recommended products and solutions
OPTITEMP TRA-P10
Resistance (RTD) temperature assembly for standard applications
Description
Quality measurement after anion exchanger
Requirements
- Installation in pressurized pipe
Recommended products and solutions
SMARTPAT PH 1590
Potentiometric pH sensor for potable, process or treated water applications
OPTISENS PH 8500
Potentiometric pH sensor for potable water applications
OPTISENS PH 8590
Potentiometric pH sensor for water and wastewater applications
Description
Quality measurement after anion exchanger 2
Requirements
- Installation in pressurized pipe
Recommended products and solutions
SMARTPAT COND 1200
Conductive conductivity sensor for water and wastewater applications
OPTISENS COND 1200
Conductive conductivity sensor for water, wastewater, process water or pure water
Description
Pressure measurement RO raw water
Requirements
- No drift
- Overpressure protection
Recommended products and solutions
OPTIBAR P 1010
Pressure transmitter for basic pressure and level applications
OPTIBAR PM 3050
Pressure transmitter for general pressure and level applications
Description
Flow measurement of deionate
Requirements
- Low conductivity
Recommended products and solutions
OPTISONIC 3400
Ultrasonic flowmeter for liquid process applications
OPTISWIRL 4200
Vortex flowmeter for utility applications and energy management systems
Description
Quality measurement deionate
Requirements
- Measurement with measuring cell
Recommended products and solutions
SMARTPAT COND 1200
Conductive conductivity sensor for water and wastewater applications
OPTISENS COND 1200
Conductive conductivity sensor for water, wastewater, process water or pure water
Description
Flow measurement of reject
Requirements
- Corosion resistant
Recommended products and solutions
OPTIFLUX 5000
Electromagnetic flow sensor for combination with IFC 100 and IFC 300 signal converters
OPTIFLUX 2000
Electromagnetic flow sensor for combination with IFC 050, IFC 100 and IFC 300 signal converters
Description
Level measuremt of deionate buffer tank
Requirements
- Process control
Recommended products and solutions
OPTIWAVE 1400
Radar (FMCW) level transmitter for liquids in water and wastewater applications
OPTIWAVE 7500
Radar (FMCW) level transmitter for liquids in narrow tanks with internal obstructions
Description
Flow measurement of deionate feed to polishing
Requirements
- Low conductivity
Recommended products and solutions
OPTISONIC 3400
Ultrasonic flowmeter for liquid process applications
OPTISWIRL 4200
Vortex flowmeter for utility applications and energy management systems
Description
Measurement of resin resistance
Requirements
- No drift
- Overpressure protection
Recommended products and solutions
OPTIBAR DP 7060
Differential pressure transmitter for flow, level, differential pressure, density and interface measurements
Description
Flow measurement of polished feedwater
Requirements
- Low conductivity
Recommended products and solutions
OPTISONIC 3400
Ultrasonic flowmeter for liquid process applications
OPTISWIRL 4200
Vortex flowmeter for utility applications and energy management systems
Description
Quality measurement deionate
Requirements
- Measurement with measuring cell
Recommended products and solutions
SMARTPAT COND 1200
Conductive conductivity sensor for water and wastewater applications
OPTISENS COND 1200
Conductive conductivity sensor for water, wastewater, process water or pure water
Description
Level measurement of demineralized water tank
Requirements
- Moisture
- Contact free measurement
Recommended products and solutions
OPTIWAVE 7500
Radar (FMCW) level transmitter for liquids in narrow tanks with internal obstructions
Description
Flow measurement to feed water system
Requirements
- Low conductivity
Recommended products and solutions
OPTISONIC 3400
Ultrasonic flowmeter for liquid process applications
OPTISWIRL 4200
Vortex flowmeter for utility applications and energy management systems
Overview
Cooling water treatment in biomass power plants
Monitoring of the cooling water
Large amounts of cooling water are required throughout the plant - mainly for evaporative cooling systems. The raw water is typically taken from open sources, such as rivers. Filtration removes mechanical impurities and solid matter. Particularly important is the conditioning of the cooling tower make-up water, in order to avoid fouling, corrosion and the formation of bacteria.
Flows in large diameter pipes can economically be measured using the OPTISONIC 3400 or OPTISONIC 6300 ultrasonic flowmeters. The OPTISYS CL is a sophisticated instrument system that can measure the biocide concentration, corrected for any pH variation.